Industrial Concrete Under Guard Floor Seal For Sealing And Stabilizing Floor Paint

Industrial Concrete Under Guard Floor Seal For Sealing And Stabilizing Floor Paint
Specifications:
For industrial and domestic areas that have been contaminated with materials such as oil, grease and cutting agents. After cleaning and residue, the suface of the affected areas will require sealing with a suitable and durable floor coating product.

Application: Airless spray, conventional spray, brush or roller

Size: 5 Litres

Drying Time:
Touch dry 1 hour at 20°C
Recoat after minimum of 6 hours
Thoroughly dry at 24 hours

Technical Data: Volume solids 35% D.F.T. 15 microns (1 coat)

Coverage:
Theoretical Spread Rate: 10 sq/metres/litre

General Info:
concrete Under Guard Floor Seal is a single pack low gloss water based clear seal which can be used on timber and cement surfaces. The concrete Under Guard Floor Seal works by penetrating porous sufaces and binding/sealing before over coating.

Key benefits of using Concrete Under Guard Floor Seal:

Marlcoats' domestic and commercial grade floor sealers
Ideal for binding, sealing, stabilizing and sealing friable and porous substrates.
Can be overcoated with a suitable paint system, left as a stand alone dust proofing sealer
Or in some cases as a chemical resistant sealer